DOTLUX LED moisture-proof luminaire MISTRALsensor IP66 1540mm 39W Powerselect 4000K frosted with radar sensor

DOTLUX LED moisture-proof luminaire MISTRALsensor IP66 1540mm 39W Powerselect 4000K frosted with radar sensor

Item number: 2822-940120
succession article: -
Predecessor article: 2822-840120
EAN: 4260712976239
Eldas no.: 941004079
TARIC code: 94051140900
Category: LED moisture-proof lighting

Beam angle: 120° protection class (IP): IP66 IK protection: IK08 Protection class: I Food-Ready: Yes Warranty in years: 5 No dim function: Yes Covering of the luminaire with thermally insulating material possible: No BEG funding: only relevant in Germany

189,00 €

Excluding 19% VAT. , (Standard)

>300 in stock
Shipping time: 2 - 3 workdays (Within country)

piece

Faster installation due to new type of luminaire design. Combination of LED gear tray and cover.
Individually replaceable branded components for lowest maintenance costs.
UV-stable, shatterproof IK08/IP66 polycarbonate housing with frosted cover provides shadow-free light distribution
5-pole through-wired with two internal luminaire connection terminals
2 full cable glands & blanking plugs
Stainless steel latches with integrated anti-theft device
Mounting accessories included (chain/ceiling/wall mounting) incl. back panel punchings
POWERselect: Dimmable in 10 steps of approx.2.5 watts each (25-39 watts via dip switch in the luminaire) additionally via remote control 50-100%.
To adjust the sensor the remote control 5139 is needed. With one remote control any number of luminaires can be adjusted. From a mounting height of 4m we recommend the long range remote control 5452.
The luminaire retains the set values even in the event of a temporary power failure
Three different functions of the high frequency sensor possible:
1. On/Off function via sensor subsequently 0% light intensity
2. On/Off function via sensor with adjustable persistence/brightness
3. ON function via sensor followed by permanent basic brightness (10% / 30% brightness)
In addition, the following values can be adjusted in steps:
- Range range (25/50/100% up to 7m)
- Daylight sensor (5 / 15 / 50Lux / deactivated)
- Light duration (5s / 1min / 5min / 10min)
- Afterglow duration ( 0s / 1min / 30min / permanent)
- Afterglow brightness (10% / 30%)
The D-mark of this luminaire with limited surface temperature is a basic requirement for luminaires in fire hazard areas (DIN EN 60598-2-24, VDE 0711-2-24) This LED luminaire is suitable for use in food processing plants.
Therefore it can also be used in areas which are certified according to the International Featured Standard (IFS) or British Retail Consortium (BRC).
Sustainable, repairable product design

Shipping weight:	2,60 kg
Shipping Dimensions(LxWxH) ( length × width × height ):	157,00 × 11,00 × 9,00 cm
Product weight:	2,40 kg
Dimension length:	1540mm
Dimension width:	100mm
Dimension height:	80mm
Luminous flux in lumens (Netto):	5390
Power consumption in watts:	39
Lumen per watt:	138
Beam angle:	120°
protection class (IP):	IP66
Light color:	white
Input voltage:	176 - 240 V AC/DC
Service life:	approx. 50.000 h at 25°C
Color temperature in Kelvin:	4000
Color-rendering-index:	CRI > 82
Motion sensor:	Radar on/off, 5m
Power Factor:	0,97
Inrush current in A:	0
IK protection:	IK08
Lumen per watt:	138
Protection class:	I
Housing colour:	gray
Switch cycles:	> 100.000
Food-Ready:	Yes
Warranty in years:	5
Energy efficiency class according to EU regulation 2019/2015:	not required
ETIM Gruppen-ID:	EC002892
Material cover:	Plastic matt/satinized
Dimming 0-10 V:	No
Dimming 1-10 V:	No
Dimming DALI:	No
Dimming DMX:	No
Dimming DSI:	No
Dimming potentiometer (integrated):	No
Dimming LineSwitch:	No
Dimming manufacturer's proprietary system:	No
Dimming mains voltage modulation:	No
Dimming phase cut-off:	No
Dimming programmable:	No
Dimming RF:	No
Dimming Sine Wave Reduction:	No
Dimming Touch and Dim:	No
Dimming Zigbee:	No
Dimming with push-button:	No
Dimming depending on control gear:	No
No dim function:	Yes
Colour consistency (McAdam ellipse):	SDCM6
Impact strength:	IK08
Covering of the luminaire with thermally insulating material possible:	No
Dimming DALI-2:	No
Dimming phase cut-on:	No
Dimming GPRS:	No
Pulse duration in µs:	0
BEG funding:	only relevant in Germany
Energieeffizienzklasse der Lichtquelle einer Leuchte:	C
Colour of light adjustable:	No

.txt

DOTLUX LED moisture-proof luminaire MISTRALsensor IP66 1540mm 39W Powerselect 4000K frosted with radar sensor

Order number: 2822-940120

Faster installation due to new type of luminaire design. Combination of LED gear tray and cover.
Individually replaceable branded components for lowest maintenance costs.
UV-stable, shatterproof IK08/IP66 polycarbonate housing with frosted cover provides shadow-free light distribution
5-pole through-wired with two internal luminaire connection terminals
2 full cable glands & blanking plugs
Stainless steel latches with integrated anti-theft device
Mounting accessories included (chain/ceiling/wall mounting) incl. back panel punchings
POWERselect: Dimmable in 10 steps of approx.2.5 watts each (25-39 watts via dip switch in the luminaire) additionally via remote control 50-100%.
To adjust the sensor the remote control 5139 is needed. With one remote control any number of luminaires can be adjusted. From a mounting height of 4m we recommend the long range remote control 5452.
The luminaire retains the set values even in the event of a temporary power failure
Three different functions of the high frequency sensor possible:
1. On/Off function via sensor subsequently 0% light intensity
2. On/Off function via sensor with adjustable persistence/brightness
3. ON function via sensor followed by permanent basic brightness (10% / 30% brightness)
In addition, the following values can be adjusted in steps:
- Range range (25/50/100% up to 7m)
- Daylight sensor (5 / 15 / 50Lux / deactivated)
- Light duration (5s / 1min / 5min / 10min)
- Afterglow duration ( 0s / 1min / 30min / permanent)
- Afterglow brightness (10% / 30%)
The D-mark of this luminaire with limited surface temperature is a basic requirement for luminaires in fire hazard areas (DIN EN 60598-2-24, VDE 0711-2-24) This LED luminaire is suitable for use in food processing plants.
Therefore it can also be used in areas which are certified according to the International Featured Standard (IFS) or British Retail Consortium (BRC).
Sustainable, repairable product design

Lumen per watt: 138; Power consumption in watts: 39; Net luminous flux in lumens: 5390; Beam angle: 120°; protection class (IP): IP66; Light color: white; Input voltage: 176 - 240 V AC/DC; Service life: approx. 50.000 h at 25°C; Color temperature in Kelvin: 4000; Color-rendering-index: CRI > 82; Motion sensor: Radar on/off, 5m; Power Factor: 0,97; Inrush current in A: 0; IK protection: IK08; Lumen per watt: 138; Protection class: I; Housing colour: gray; Switch cycles: > 100.000; Food-Ready: Yes; Warranty in years: 5; Energy efficiency class according to EU regulation 2019/2015: not required; ETIM Gruppen-ID: EC002892; Material cover: Plastic matt/satinized; Dimming 0-10 V: No; Dimming 1-10 V: No; Dimming DALI: No; Dimming DMX: No; Dimming DSI: No; Dimming potentiometer (integrated): No; Dimming LineSwitch: No; Dimming manufacturer's proprietary system: No; Dimming mains voltage modulation: No; Dimming phase cut-off: No; Dimming programmable: No; Dimming RF: No; Dimming Sine Wave Reduction: No; Dimming Touch and Dim: No; Dimming Zigbee: No; Dimming with push-button: No; Dimming depending on control gear: No; No dim function: Yes; Colour consistency (McAdam ellipse): SDCM6; Impact strength: IK08; Covering of the luminaire with thermally insulating material possible: No; Dimming DALI-2: No; Dimming phase cut-on: No; Dimming GPRS: No; Pulse duration in µs: 0; BEG funding: only relevant in Germany; Energieeffizienzklasse der Lichtquelle einer Leuchte: C; Colour of light adjustable: No
width: 100mm

There are no reviews yet.

Contact

First name - optional

Last name

E-Mail

Question on item

Question